Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!rex!ukma!usenet.ins.cwru.edu!skybridge!rich
From: rich@skybridge.SCL.CWRU.Edu (Rich Warwick)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: PC Pop Mail
Summary: The G1EMM version of ka9q has this feature.
Keywords: G1EMM, ka9q, POP2
Message-ID: <1991Apr9.135637.23853@usenet.ins.cwru.edu>
Date: 9 Apr 91 13:56:37 GMT
References: <1991Apr7.034624.6153@psych.toronto.edu> <9104081647.AA20557@terminus.umd.edu>
Sender: rich@scl.cwru.edu
Followup-To: rich@sc.cwru.edu
Organization: Love, Glide, Inc.
Lines: 42
X-Post-Machine: shasta.scl.cwru.edu
Nntp-Posting-Host: shasta.scl.cwru.edu

In article <9104081647.AA20557@terminus.umd.edu> dzoey@TERMINUS.UMD.EDU writes:
>
>> I am looking for a list of POP2 E-mail software packages
>> (commercial or otherwise) that will operate using
>> the packet driver interface operate on PC's (or compatable
>> with BWNFS).
>
>Take a look at popmail from U of Minnesota
>(boombox.micro.umn.edu:pub/Popmail) It uses the packet driver
>interface for the PC and is also available for the Macintosh as well.
>It may not run with BWNFS though since packet driver does not support
>multiple instances of the same protocol (in this case TCP/IP).  It
>will run as long as another TCP/IP program is not loaded (e.g.  You
>can run telnet and then popmail, but not NFS and popmail because the
>NFS stays loaded while popmail runs.  Telnet unloads when it's
>finished.)

The G1EMM version of ka9q/NOS has both a POP2 server *and* client.
It does run over packet drivers, *and* Telnet, FTP, finger, a modified
traceroute and SMTP are all available through the same interface (hence
only one TCP/IP stack). NFS probably will *not* run, for the same reasons
stated above. One nice thing though, Sources are available as well as
executables. There is also a BOOTP client/server available.
G1EMM is avalable for anonymous FTP from:
	 Thumper.BELLCORE.Com:/pub/ka9q/g1emm/kh113016.exe (executable)
	 Thumper.BELLCORE.Com:/pub/ka9q/g1emm/kh113016.zip (sources)
The BOOTP Stuff is available from:
	 Thumper.bellcore.com:/pub/ka9q/incoming/bootp.tar (sources only)
		(unless Phil Karn has moved it from the ~/incoming directory)
		(in which case, check /pub/ka9q/*)

			Hope this helps,
				Rich



--
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Richard Warwick              Internet:  rich@b62707.student.CWRU.Edu
Case Western Reserve U.	      o o       rich@SCL.CWRU.Edu
Cleveland (YUCK!!!!), OH       -        rmw3@po.CWRU.Edu