Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!hellgate.utah.edu!fcom.cc.utah.edu!cc.utah.edu!cc.usu.edu!jrd
From: jrd@cc.usu.edu
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Using packet drivers under DESQview
Message-ID: <1991Apr6.182237.47302@cc.usu.edu>
Date: 7 Apr 91 00:22:36 GMT
References: <9104012225.AA28164@ftp.com> <27FB4B33.6083@tct.com>
Organization: Utah State University
Lines: 16

In article <27FB4B33.6083@tct.com>, chip@tct.com (Chip Salzenberg) writes:
> Well, if PC/TCP won't run under DesqView, could someone tell me how to
> make the WD8003 and IPXPKT packet drivers run under DesqView?  It's a
> crime not to use DesqView with an eight-megabyte '386, but because the
> packet drivers kill DesqView, I'm stuck.  Any pointers?
> -- 
> Chip Salzenberg                    <chip@tct.com>, <uunet!pdn!tct!chip>
>   Brand X Industries Custodial, Refurbishing and Containment Service
>             When You Never, Ever Want To See It Again [tm]
------------
Chip,
	So how come I was able to use MS-DOS Kermit twice over/under DV,
once to the serial port and again across TES/NetWare with a Packet Driver
for a WD8003E board in a second window? As usual, load networking things
outside of DV.
	Joe D.