Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!emory!dixie.com!eeh
From: eeh@Dixie.Com (Ed Howland)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Help with NET_PC and Clarkson Packet Drivers
Keywords: KA9Q
Message-ID: <9436@rsiatl.Dixie.Com>
Date: 9 Apr 91 22:18:24 GMT
References: <9385@rsiatl.Dixie.Com>
Organization: Dixie Communications Services
Lines: 69


Please excuse if you saw my original post twice, our software seems to
duplicate the message going out.

But in order help people help me with the Clarkson driver + KA9Q Net PC
software, here is some sesions captures when I try to start things up.

After some experimentation I found out that my NCSA software had config.tel
interrupt=5. But when I call ubnicps2.com with:
ubnicps2 0x60 5 or with all parameters  0x60 5 0x1550 0xD000
it comes back with interrupt = 3. What gives. The .asm has some mysterious
thing about it always is 3??? The NCSA stuff works fine.

Anyway here is the data....

----Session capture of 'ubnicps2 0x60 5 0x1550 0xd000'
Packet driver for the ubnicps2, version 9.1.2
Packet driver skeleton copyright 1988-91, Russell Nelson.
This program is free software; see the file COPYING for details.
NO WARRANTY; see the file COPYING for details.


Packet driver is at segment 152D
TDR: Ok
Interrupt number 0x3 (3)
I/O port 0x1550 (5456)
Memory address 0xD000 (53248)
My Ethernet address is 00:DD:01:0A:05:0A
-----------------------------------------
----- lines from autoexec.net -----------
attach packet 0x60 eth 5 1500
#
ip ttl 16
#
tcp window 432
-----------------------------------------
---- hosts.net --------------------------
#
97.0.0.1        don
97.0.0.6        pluto
97.0.0.12        pickens
97.0.0.50        carthage
97.0.0.10        cobb
-----------------------------------------
---- Session capture from starting ------
-----net.exe and trying telnet don ------
KA9Q Internet Protocol Package, v871225.31 DS = 2dae
Copyright 1988 by Phil Karn, KA9Q
net> telnet don
SYN sent
Closed (ICMP: Host unreachable)
net> exit
-----------------------------------------
---- Comparison of NCSA config.tel lines-
hardware=nicps
interrupt=5                     # hardware IRQ interrupt
address=d000
ioaddr=0x1550
---- THESE WORK with NCSA Telnet !!!!!!!

Thanks in advance.
Ed



-- 
Ed Howland   Internet:   eeh@dixie.com   uucp: ...{uunet,emory}!rsiatl!eeh
"I am expressly forbidden to offer any kind of warranty. This covers ideas,
 thoughts, opinions, or just plain gibberish. They are only offered 'As is'."