Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!van-bc!rsoft!mindlink!a46
From: Robin_Ritchey@mindlink.UUCP (Robin Ritchey)
Newsgroups: comp.sys.amiga.applications
Subject: Re: ProDraw 2.0 and PostScript output
Message-ID: <5395@mindlink.UUCP>
Date: 6 Apr 91 00:30:08 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 21

Chris,
        Have you altered the "Density" setting in the "ouput postscript"
requester?
        Keep that setting at about 60 to get all the right grey scales. Higher
numbers are good for higher desity printers but for 300 dpi I find 60 to have
the best results.

------
     I read someone was having trouble with PPagev2.0. They tried to install
the program and then run the program and it was crashing etc.
        Sorry, I lost the message, but to try and help that person.
        It seems that Gold Disk install script relies on us (the users) on
using Commodore's commands in the "c:" directory. If you have the arp commands
installed then the install script from Gold Disk will choke. I installed PPage
and PDraw by coping the files using an utility master type program.
        So if you have the arp commands and install the program all the files
will NOT get transferred, and when you try and run the program it will not have
the other files it needs.

Robin Ritchey - a46@mindlink.UUCP
aka YellowQuill Layout and Design