Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!snorkelwacker.mit.edu!bloom-beacon!eru!hagbard!sunic!mcsun!hp4nl!dnlunx!pttrnl.nl!prak2
From: prak2@pttrnl.nl
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Redirecting paralell port output...
Message-ID: <1991Apr4.121504.65032@pttrnl.nl>
Date: 4 Apr 91 11:15:04 GMT
Article-I.D.: pttrnl.1991Apr4.121504.65032
References: <98E169C3907F20094A@ucs.uwplatt.edu>
Lines: 21

In article <98E169C3907F20094A@ucs.uwplatt.edu>, UCSEDG@ucs.UWPLATT.EDU writes:
> 
>  
>         Does anyone know if there is a relatively simple way to redirect the
> output from the paralell port, and save it to a disk file?
>  
> --------------+----------------------------------------------------------------
>               |             --Multitasking on the IBM and Mac, the BIG LIE!
>  Eric Glanz   |       ///           Only Amiga makes it possible.
> University of |      ///
>  Wisconsin-   |  \\\///     UCSEDG@UCS.UWPLATT.EDU        (Internet)
>  Platteville  |   \XX/      UCSEDG@UWPLATT.BITNET         (Bitnet)
>               |
> --------------+----------------------------------------------------------------
>      "When civilization falls in it's grave, technology throws in the dirt"
> --------------------------------------------------------------------------------
>  

You should be able to do so with CMD, which is included on your Workbench disk.
I do not exactly know how this works, but the command is described in the
manual.