Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!dsinc!netnews.upenn.edu!vax1.cc.lehigh.edu!lehigh.bitnet!GB03
From: GB03@NS.CC.LEHIGH.EDU (George Philip Bluhm)
Newsgroups: comp.sys.amiga.hardware
Subject: RE: Serial Line
Message-ID: <06049113:19:15GB03@lehigh.bitnet>
Date: 6 Apr 91 18:19:23 GMT
Lines: 11

You may have to run procomm in the host mode. crtl-q will enter this
mode.  It will ask the user to login and for a pass word.  Pressing
enter at both prompts will establish communication between the machines
assuming you have a comm program runnning on the AMIGA.  Xon Xoff mode
will work.  Make sure both comm programs have the same baud rate,
start-stop bits, parity check and word length, (7 or 8 bit).

Rots of ruck.  Usual denials and caveat emptor.  This advice is worth
what it cost...

George