Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!rochester!kodak!eastman!b56vxg.dnet@kodak.com!harding
From: harding%b56vxg.dnet@kodak.com (JON HARDING)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: AT Bridgeboard to external floppy... help? again?
Keywords: Bridgeboard AT 2286
Message-ID: <1841@eastman.UUCP>
Date: 8 Apr 91 16:07:13 GMT
References: <1991Apr3.153236.1@vf.jsc.nasa.gov> <1991Apr3.230854.17091@jato.jpl.nasa.gov> <1991Apr4.082816.1@vf.jsc.nasa.gov> <1991Apr4.171111.13500@ns.network.com>
Sender: news@eastman.UUCP
Reply-To: harding%b56vxg.dnet@kodak.com
Distribution: usa
Organization: Eastman Kodak Company, Rochester NY, USA
Lines: 13
News-Software: VAX/VMS VNEWS 1.3-4

In article <1991Apr4.171111.13500@ns.network.com>, guy@ns.network.com (Guy D'Andrea) writes...
>How can I rig a cable so I can plug my external Amiga floppy into an AT 
>Bridgeboard (Like I could with my XT BB...)?
> Guy Dandrea, Network Systems Corp.                       //                 
Well, DALCO sells a kit: disk enclosure, cables, bulkhead connectors, etc.
for $69 which I used to add a second 1.2Mb drive to my new A2286 board, ($69
for the drive, if you don't have one.  If you already have a drive, it's
probably more complicated since it used power from the A2088 external plug.
(Route separate power and get a twist-dual-drive-cable as shown in the manual?)
N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J 
|	Jon Harding, N2KZJ	email: harding%b56vxg.dnet@Kodak.COM	      |
|		* I don't represent KODAK by word or deed. *		      |	
N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J