Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!mips!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewse!hjanssen
From: hjanssen@cbnewse.att.com (hank janssen)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: AT Bridgeboard to external floppy... help? again?
Message-ID: <1991Apr9.155713.21743@cbnewse.att.com>
Date: 9 Apr 91 15:57:13 GMT
References: <1841@eastman.UUCP>
Distribution: usa
Organization: AT&T Bell Laboratories
Lines: 23

From article <1841@eastman.UUCP>, by harding%b56vxg.dnet@kodak.com (JON HARDING):
> In article <1991Apr4.171111.13500@ns.network.com>, guy@ns.network.com (Guy D'Andrea) writes...
>>How can I rig a cable so I can plug my external Amiga floppy into an AT 
>>Bridgeboard (Like I could with my XT BB...)?
>> Guy Dandrea, Network Systems Corp.                       //                 
> Well, DALCO sells a kit: disk enclosure, cables, bulkhead connectors, etc.
> for $69 which I used to add a second 1.2Mb drive to my new A2286 board, ($69
> for the drive, if you don't have one.  If you already have a drive, it's
> probably more complicated since it used power from the A2088 external plug.
> (Route separate power and get a twist-dual-drive-cable as shown in the manual?)
> N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J 
> |	Jon Harding, N2KZJ	email: harding%b56vxg.dnet@Kodak.COM	      |
> |		* I don't represent KODAK by word or deed. *		      |	
> N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J 


I have tried mailing, but it keeps on bouncing.
Where can i get the adress/phone number for DALCO>???

Thanx,

Hank JAnssen.
att!ihlpb!hjanssen