Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!news.cs.indiana.edu!noose.ecn.purdue.edu!en.ecn.purdue.edu!wwarner
From: wwarner@en.ecn.purdue.edu (Art Warner)
Newsgroups: comp.sys.amiga.misc
Subject: Re:  2.0 availability and requirements
Message-ID: <1991Apr8.183227.3338@en.ecn.purdue.edu>
Date: 8 Apr 91 18:32:27 GMT
References: <jms.3523@vanth.UUCP> <3807@tmiuv0.uucp> <stevek.4292@amiglynx.UUCP>
Organization: Purdue University Engineering Computer Network
Lines: 24

In article <stevek.4292@amiglynx.UUCP> stevek@amiglynx.UUCP (Steve Krulewitz) writes:
>While you are on the subject of ZKick, how can I make the computer recognise
>the HD on startup?  I have a Supra HardCard w/WordSync, and durring boot under
>2.0, it plays a little with the HD, but dosent use it - and no hard drive
>icons appear on the workbench (not even my auto mounting DH0:).  I think this
>may be due to that the drive dosent use MOUNT DH0: or MOUNT DH1:, it has its
>own special SUPRAMOUNT 0 (to mount DH1:, DH0: mounts automaticly).  Any help??
>
>  -=+ Steve Krulewitz +=- -=+ Fair Lawn, NJ +=- -=+
>                                     UUNET!tronbox!amiglynx!stevek.UUCP +=-
This may help:
  Make SURE that the partition device names are:
                "WB_2.x" and "WB_1.3"

You can "relabel" it anything you want, but remember that there is a difference
between "device name" and "partition label".  If you don't have the right name
for the device then the bootup WILL NOT recognize either partition for bootup.
I found this out the hard way!
 

-- 
Art Warner
wwarner@en.ecn.purdue.edu
Amiga makes it happen.......IBM, Mac, Sun, and Next make it expensive!