Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!asuvax!ukma!usenet.ins.cwru.edu!agate!ucbvax!gnh-starport.cts.com!whitewolf From: whitewolf@gnh-starport.cts.com (Tae Song) Newsgroups: comp.sys.apple2 Subject: Re: Mouse hints Message-ID: Date: 5 Apr 91 09:13:20 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 14 X-Unparsable-Date: Thu Apr 4 91 at 03:56:52 (EST) |Next time you have build up on your mouse, try this: | |Take out the Mouse Ball. Soak it in Isopropyl Alcohol. Then take a Q-Tip |and dip it in alcohol also (fresh of course) Then rub it on the metal bars |that spin and any where there is a buildup. It evaporates much faster than |water, so you don't have to wait long to be able to hook up to your |computer again. It you get oils on the exterior of the mouse, do the same. |It really cleans off/out the mouse. It makes the mouse much faster... NO! NEVER-EVER use alcohol on rubber! Alcohol will dry out the rubber til it cracks or warps. Use soap and water, also you might want to clean the mouse pad. whitewolf@gnh-starport!info-apple