Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uwm.edu!spool.mu.edu!mips!apple!shrinkit From: shrinkit@Apple.COM (Andrew Nicholas) Newsgroups: comp.sys.apple2 Subject: Re: HypercardGS Crashes? Message-ID: <51290@apple.Apple.COM> Date: 8 Apr 91 10:48:50 GMT References: Organization: Apple Computer Inc., Cupertino, CA Lines: 24 In article joseph@elbereth.rutgers.edu (Seymour Joseph) writes: >Anyway, I installed system 5.0.4 on my system and then launched >hypercard GS. After reading the disk for a few seconds, my system >crashes with a "System error 201" and I am forced to restart. Error $0201 means you ran out of memory. >My system is a 2.25 Meg Rom 01 GS with a Transwarp GS and a RamFast >SCSI card. Try making sure that you don't have a ramdisk allocated, first. Then try gooting from the system 504 disk itself. If you can boot the system 504 disk, but can't run hypercard, then you probably have a ramdisk allocated. If that doesn't work, try elaborating on what your system's setup contains (exactly). andy -- Andy Nicholas GEnie & America-Online: shrinkit Apple IIGS System Software CompuServe: 70771,2615 Apple Computer, Inc. InterNET: shrinkit@apple.com