Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!UTCVM.BITNET!MQUINN From: MQUINN@UTCVM.BITNET Newsgroups: comp.sys.apple2 Subject: Re: StyleWriter printer Message-ID: <9104090231.AA13040@apple.com> Date: 8 Apr 91 22:37:29 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 42 T .EDU> On Mon, 8 Apr 91 03:36:49 GMT Michael Heintz said: > >Then how come the person who wrote the technical specifications section >on the spec sheet bothered to specifically mention those fonts and then >added later: "The StyleWriter printer can support additional TrueType >fonts from Apple and other suppliers" ??? The stylewriter comes with a DISK with four truetype fonts on it. You install those fonts on you mac, as well as an init that allows system software 6.0.5 to use truetype (until system 7 comes out). When you print to the stylewriter from the mac, the stylewriter does not receive 'character' data. The mac calculates and draws a page image in the macs memory, THEN it sends that BIT MAP image to the stylewriter. >Don't think I'm trying to misinform anyone here... I just reported the >information as I received it... and the information was received from >an Apple Dealer. ^^^^^^^^^^^^ That's why it's wrong. >And, while I have your attention: If the IIgs were to send a bitmapped >font to the StyleWriter (with the correct driver of course) would the >printer print a font with ragged edges, or does TrueType smooth it for >us? Or... would we need special support in the driver for certain >TrueType fonts?? TryeType doesn't smooth out 'bitmaped fonts'. That's not its job. True Type is just an outlined font. If you send a bitmap font to the stylewriter (from ANY PC), that's what you'll get... a chunky printout (if you're printing it at a large size). If your GS is using TrueType, then the GS would render a page image in the GSs' RAM, then just dump it to the stylewriter . >Mike >mkheintz@vela.acs.oakland.edu ---------------------------------------- BITNET-- mquinn@utcvm <------------send files here pro-line-- mquinn@pro-gsplus.cts.com