Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!jato!vsnyder
From: vsnyder@jato.jpl.nasa.gov (Van Snyder)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: info wanted on Adaptec ACB4000
Keywords: Adaptec 4000 info
Message-ID: <1991Apr4.185904.29630@jato.jpl.nasa.gov>
Date: 4 Apr 91 18:59:04 GMT
References: <1252@idcapd.idca.tds.philips.nl>
Reply-To: vsnyder@jato.Jpl.Nasa.Gov (Van Snyder)
Organization: Jet Propulsion Laboratory, Pasadena, CA
Lines: 14

In article <1252@idcapd.idca.tds.philips.nl> wilko@idca.tds.PHILIPS.nl (W.C. Bulte) writes:
>Recently I got hold of an Adaptec 4000 controller board. Since I understand
>that this board is used in Atari products, I wonder if someone can provide me
>with some more info on this controller. Specifically on the jumpers
>present on the board. Of course my board came without ANY docs :-(

You probably don't want to call from the Netherlands, but other readers may
care to know that Adaptec's literature department phone number is (US)
408/945-2579.

-- 
vsnyder@jato.Jpl.Nasa.Gov
ames!elroy!jato!vsnyder
vsnyder@jato.uucp