Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-pcd!hpfcso!hpfcdc!lienhart
From: lienhart@hpfcdc.HP.COM (Bob Lienhart)
Newsgroups: comp.sys.hp
Subject: Re: Problem connecting LJIII to 9000-350...
Message-ID: <5570593@hpfcdc.HP.COM>
Date: 5 Apr 91 20:56:16 GMT
References: <41572@ucbvax.BERKELEY.EDU>
Organization: HP Fort Collins, Co.
Lines: 18

>A ls -l on /dev/lj3 shows:
>
>/dev/lj3 crw-rw---- 	2  lp  sys  1  0x090000

Try:
/dev/lj3 crw-rw-r- 	2  lp  bin  1  0x090004

Also if your modem used to work off of this device, you will 
probably have to switch pins 2 and 3 on the rs232 cable.

Suggestion #2.  Remove this printer and /dev/lj3 and reinstall
it using sam.  You will have problems finding a model that 
will work though.  All of the present laserjet models send 
PCL escape sequences that a postscript printer will not accept.

Postscript printers are not supported until 8.0 HP-UX.

Bob Lienhart