Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!jarthur!uunet!jwt!john
From: john@jwt.UUCP (John Temples)
Newsgroups: comp.sys.ibm.pc.hardware,connect.audit
Subject: Re: Conner 200M IDE drive
Message-ID: <1991Apr4.040715.13946@jwt.UUCP>
Date: 4 Apr 91 04:07:15 GMT
References: <1991Mar31.162532.9509@ibmpcug.co.uk> <1991Apr3.035310.11481@jwt.UUCP> <1991Apr3.113533.1777@cs.mcgill.ca>
Organization: Private System -- Orlando, FL
Lines: 9

In article <1991Apr3.113533.1777@cs.mcgill.ca> tinyguy@cs.mcgill.ca (Yeo-Hoon BAE) writes:
>I have used the 105Meg version of Conners SCSI drive, and although I'm
>running it on Amiga with DMA controller, it gives roughly 600-750k/s

How was this transfer rate measured?  In any event, it can't be assumed
that the transfer rate of a SCSI version of the drive would have any
bearing whatsoever on the IDE version.
-- 
John W. Temples -- john@jwt.UUCP (uunet!jwt!john)