Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!udel!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!et10+
From: et10+@andrew.cmu.edu (Edmund E. Tsai)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: NEC multisync
Message-ID: <obzuNeS00WBLQ25V1R@andrew.cmu.edu>
Date: 7 Apr 91 23:08:26 GMT
Organization: Carnegie Mellon, Pittsburgh, PA
Lines: 24


The original Multisync can handle the 800x600 graphics, but the only
problem is that the monitor has problem with v-hold

Someone, has suggested the following fix :

    Wire a potentiomenter in series with the v-hold and a switch in
parallel with the pot.
    Then, adjust the pot so that when the switch is off, the monitor
displays fine in non-super vga, then turn on and adjust for super vga.

Anybody out there have suggestions on how to accomplish this without
manual labor?

Thanks.
Ed

*********************************
Edmund Tsai
Phone: (412)268-4602
email: et10+@andrew.cmu.edu
Address:     1000 Morewood Ave , Box 3288
             Pittsburgh, PA 15213
*********************************