Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!snorkelwacker.mit.edu!stanford.edu!agate!ucbvax!hplabs!hpcc05!hpsgm2!vanmick
From: vanmick@hpsgm2.sgp.hp.com (Van Der Beek Michael-Leo)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: HELP!! - VGA w/ SCSI conflict
Message-ID: <70007@hpsgm2.sgp.hp.com>
Date: 8 Apr 91 02:21:34 GMT
References: <li.670753564@mrcnext>
Organization: HP Singapore
Lines: 10

Hi,

	This is exactly what I did when I had a problem with a SCSI card,
the ST01 with my Syquest. The dip switch 5 was enough and it worked like a
dream.

	Good luck! If you have still other problems you may have to change
the address range of either the VGA card or the SCSI card.

Michael