Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!mcsun!hp4nl!star.cs.vu.nl!iheitla
From: iheitla@cs.vu.nl (Ilja Heitlager)
Newsgroups: comp.sys.ibm.ps2.hardware
Subject: Model 70 hardware
Message-ID: <9586@star.cs.vu.nl>
Date: 8 Apr 91 13:19:15 GMT
Sender: news@cs.vu.nl
Lines: 22

I recently got a IBM model 70, running SCO-ODT.
(nice package, only badly documented)
The only thing is I got the machine second-hand, and so I haven't got any
documents.
So my questions are:

1-	How much RAM can I put on-board.
2-	What's the square connector with all these pins.
3-	Can I add a second HardDisk or do I need a extra (SCSI) interface
4-	Why is the printer port on lp1 
5-	What sort of HardDisk interface has the Model70
6-	Is there a good book about the MCA-bus.

	
Ilja, 

        ====================================================                  
	Ilja Heitlager          | 
	Vrije Universiteit      | E-Mail <iheitla@cs.vu.nl>
	Amsterdam               |
	The NetherLands.	|            
        =====================================================