Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!math.fu-berlin.de!tmpmbx!netmbx!hase From: hase@netmbx.UUCP (Hartmut Semken) Newsgroups: comp.sys.mac.hardware Subject: Re: Memory upgrades on the MAC SE Message-ID: <2226@netmbx.UUCP> Date: 9 Apr 91 18:27:06 GMT References: Distribution: comp Organization: netmbx, Berlin, Germany Lines: 17 tjfs@tadtec.uucp (Tim Steele) writes: >The configurations I'm interested in are: >4x256k SIMMs preset in a 1 Meg SE >2x1MB SIMMs setting "2M/4M" >3x1MB SIMMs impossible! The SE always needs pairs of SIMMs (16 bit bus!) >4x1MB SIMMs try "2M/4M". If that fails, remove the jumper. as it is only one jumper, You should have no problem finding out the correct setting with some experiments :-) Incorrect jumper setting will not hurt Your motherboard or Simms. hase -- Hartmut Semken, Lupsteiner Weg 67, 1000 Berlin 37 hase@netmbx.UUCP Hi! (Zaphod Beeblebrox)