Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!news.cs.indiana.edu!nstn.ns.ca!cs.dal.ca!ug.cs.dal.ca!earhard
From: earhard@ug.cs.dal.ca (Mark Earhard)
Newsgroups: comp.sys.mac.hardware
Subject: Mac + Solder Joints
Message-ID: <1991Apr9.204332.15796@cs.dal.ca>
Date: 9 Apr 91 20:43:32 GMT
Article-I.D.: cs.1991Apr9.204332.15796
Sender: news@cs.dal.ca (USENET News)
Distribution: na
Organization: Math, Stats & CS, Dalhousie University, Halifax, NS, Canada
Lines: 14
Nntp-Posting-Host: ug.cs.dal.ca

I have a Mac plus that seems to be developing the standard old solder joint
problem:  After about an hour the screen turns off, then by tapping the
side of the computer, or by squeezing the sides together, he could get it to
come back on.  Now, however, it is realy bad.

Does anyone know which joints need to be re-done?  I could re-solder them 
without much problem if I knew where to do it.

Any info on this process would be appreciated!

By the way-  Anyone know anything about Epson Printer drivers for the Mac?
I've got a serial printer that behaves like an epson and no driver!

Marcus.