Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!tecate.mips.com!trevc
From: trevc@tecate.mips.com (Trevor Cotton)
Newsgroups: comp.sys.mips
Subject: Re: UUCP over TCP/IP
Message-ID: <2104@spim.mips.COM>
Date: 9 Apr 91 17:52:41 GMT
References: <1991Apr8.204206.2031@mother.bates.edu> <1991Apr9.164524.6695@smsc.sony.com>
Sender: news@mips.COM
Reply-To: trevc@mips.com
Organization: Mips Computer Systems Inc., Sunnyvale, CA
Lines: 48
Nntp-Posting-Host: tecate.mips.com

In article <1991Apr9.164524.6695@smsc.sony.com>, tin@smsc.sony.com (Le Tin) writes:
|> In article <1991Apr8.204206.2031@mother.bates.edu> rob@mother.bates.edu (Rob Spellman) writes:
|> >Has anybody had any luck setting up UUCP to work over TCP/IP?  I looked back
|> >through the archives of comp.sys.mips, and saw two similar requests, but
|> >I found no responses.  I even sent mail to one of the people who posted
|> >the question, and they never received a response.
|> > 
|> 
|> The problem is in getting the correct port setup for UUCP over TCP.  Of
|> course, that involves some fairly arcane incantations...
|> 
|> Luckily, someone else has already struggled through this and posted the
|> solution.  I saved his instructions and now repost it here for those who
|> missed it.
|> 
|> - Tin Le
|> 
|> +------------------------------------------------------------------------
|> Path: szebra!claris!apple!bionet!agate!ucbvax!ucsd!usc!cs.utexas.edu!chinacat!balkan!wrangler!bill
|> From: bill@wrangler.WLK.COM (Bill Kennedy)
|> Newsgroups: comp.sys.ncr
|> Subject: ethernet uucp with TLI 3.00.01
|> Keywords: NLS TLI uucp ethernet
|> Message-ID: <471@wrangler.WLK.COM>
|> Date: 3 Jan 91 20:29:30 GMT
|> Organization: W.L. Kennedy Jr. & Associates, Pipe Creek, TX
|> Lines: 195
|> 
|> This is lengthy, so if you have no interest in making uucp work on
|> your TCP/IP ethernet, please hit `n' now.  You might want to save
|> the article though, in case Murphy strikes and you need to implement
|> it in a hurry in the future.  It took some time and experimentation
|> to make this work!
|> 

UUCP over TCP under RISCOS 4.xx does not use TLI, and hence this post does not
apply. Indeed, TLI is not supported under RISCos 4.xx.

Please see my previous posting on how to set up UUCP over TCP for 
RISCos 4.xx.

-- 
--trevc--

  Trevor Cotton, Sustaining Engineering, MIPS Computer Systems Inc.
  MS 6-05, 930 DeGuigne Drive, Sunnyvale, CA 94086
  Tel: +1 408 524 7286  Fax: +1 408 524 7521
  Email: {wyse,ames,decwrl,pyramid}!mips!trevc    trevc@mips.com