Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!uunet!crystal1!jw
From: jw@crystal1.UUCP (John S. Wainscott)
Newsgroups: sci.electronics
Subject: Making an explosion
Message-ID: <413@crystal1.UUCP>
Date: 3 Apr 91 17:39:14 GMT
Article-I.D.: crystal1.413
Distribution: usa
Organization: Software Clearing House;Cinti.,OH
Lines: 11

I'm trying to build an explosion sound effects circuit as part of a larger
circuit but I can't seem to get away from using lots of parts.  The circuit 
is powered by 3V to 4.5V and the explosion is triggered by a CMOS gate.  I'd 
like there to be a slowly increasing tone (20-30sec) followed by an explosion
then silence.

Any ideas would be greatly appreciated.


John Wainscott                         jw@sch.com
Software Clearing House, Inc.