Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!rphroy!caen!uwm.edu!bionet!agate!darkstar!ucscb.UCSC.EDU!woody From: woody@ucscb.UCSC.EDU (Bill Woodcock) Newsgroups: comp.dcom.lans Subject: Re: 10Base-T hubs Message-ID: <14354@darkstar.ucsc.edu> Date: 11 Apr 91 21:40:55 GMT References: <1582@vtserf.cc.vt.edu> <1991Apr10.132856.8077@keinstr.uucp> <1991Apr10.172643.26334@leland.Stanford.EDU> Sender: usenet@darkstar.ucsc.edu Distribution: usa Organization: University of California, Santa Cruz Lines: 35 > Hmm, I don't remember the price of the AMP > system exactly, but as I recall it was on the > order of $50/outlet for the fancy connectors > and patch cables. Given budget constraints, > who would pay to have this put in? Given that > 10Base-T repeaters are $60/port, where's the > cost savings? I put in a mid-sized net using the AMP hardware, and cost of the faceplate, drop cable, BNC "FastTap" jack, two RJ-13s, an RJ-45, and the gangbox came to nearly $70 per location. Nice stuff, though, and easy to install. I'm doing a roughly comparable job at the moment, using Leviton's InfoQuad jacks. They're putting them together for me custom, and the whole thing comes to just under $20 each. Not bad for a custom order on only 36 units. -Bill Woodcock BMUG NetAdmin _______________________________________________________________________________ 0000 : 0600 0800 7700 FE00 FF 0 FF8 7F 0 3 00 48 bill.woodcock.iv 0010 : CC00 7C00 0C00 1000 2800 440 8200 40 0020 : C000 4000 8000 C000 C 00 800 80 48 0 9 woody@ucscb.ucsc.edu 0030 : FF00 F000 7F80 CC00 CC 0 7 80 7 80 CC 6 0040 : CC00 7F80 9800 7800 CC00 CC0 CC 0 C 00 2355.virginia.st 0050 : CC00 CC00 FC00 CC00 CC 0 2000 10 0 7 00 C 0 0060 : CC00 CC00 CCC0 4800 2 00 1 00 2 00 48 0 9 berkeley.california 0070 : 4800 2400 1200 1000 2800 4 00 8 00 E0 0080 : 3000 6000 F000 6000 000 60 0 600 C0 0 01C 94709.1315 _______________________________________________________________________________