Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!rphroy!caen!uflorida!gatech!ncar!csn!boulder!daemon
From: JOHN@heap.cisco.com (John Wright)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: Down-loading system images
Message-ID: <34126@boulder.Colorado.EDU>
Date: 12 Apr 91 15:39:30 GMT
Sender: daemon@boulder.Colorado.EDU
Lines: 15

Yes, it should work. I had someone doing that just yesterday.

on the 8.2 system tftp-server system cisco2-csc3
on the target system move the config register 0 poistion to the left one
position. Make sure jumper 9 is removed, this controls the use of boot-csc2
which is not needed on a csc/3. You can use boot system command on the
target to direct the tftp request directly to the source cisco.

If you still have this problem I'd be interested in a seeing a packet trace.

Regards,
John Wright
Customer Engineering
cisco Systems, Inc.
-------