Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!GANGES.UCOP.EDU!opschk
From: opschk@GANGES.UCOP.EDU
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Installing ka9q/nos on a 386 PC
Message-ID: <9104130752.AA12072@ganges.ucop.edu>
Date: 13 Apr 91 07:52:41 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 15


I got all the *.c, *.h , makefile, net.exe and documentation on the PC. I do
have turbo C++. The documentation does not have any installation instruction.
The PC is running DOS 4.0. My question is how do I proceed from this point
on? Is the net.exe file I got good enough and I just need to build an
autoexec.net and a config.tel, or do I need to make some modifications to
the .c/.h/.asm files and recompile them under turbo C++ ?
Also, if you can send me a sample autoexec.net/config.tel, I would greatly
appreciate it, the documentation is not very clear on how to build them.
BTW, I installed a WD8003e and it's working with FTP.

			Many Thanks in Advance

			Camille Kayruzian
			opschk@ganges.ucop.edu