Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu From: conan@ccwf.cc.utexas.edu (Robert Faulkner) Newsgroups: comp.sys.amiga.applications Subject: Re: WorkBench 2.0 Keywords: none Message-ID: <47024@ut-emx.uucp> Date: 11 Apr 91 04:25:39 GMT References: Sender: news@ut-emx.uucp Reply-To: conan@ccwf.cc.utexas.edu (Robert Faulkner) Distribution: na Organization: University of Texas ccwf.cc.utexas.edu Lines: 24 In-reply-to: vidiot.bbs@shark.cs.fau.edu (Eric Rankin) Originator: conan@dopey.cc.utexas.edu WB 2.0 should be out soon, or so C= has said for a while ;-) As far as system requirements go , I am a developer and I use 2.0 daily. My system is a A2000 w/ 80 meg HD, 5 Megs of Ram, and the Fat Agnus chip. Plus a few other things no need of mentioning. The original sender stated he had 5 megs of Ram, that is great, 2.0 should run fine. You will need the new Rom, which should be available when the 2.0 is released. As far as 2.0 is concerned it will set itself up to whatever Agnus and Denise chips you have. However I reccomend getting the new chips, they will make life much more pleasent. 2.0 is great running on the A2000, at times it can be a little slower than 1.3, but it runs fine. If you have any more questions you can e-mail me. -- Robert Faulkner conan@ccwf.cc.utexas.edu /// Recursion: Thinking \\\/// University of Texas about \\// Amiga Computers Thinking