Xref: utzoo comp.sys.amiga.hardware:8177 comp.sys.amiga.emulations:671
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!petunia!news
From: siannce@polyslo.CalPoly.EDU (Twinkie the Sponge Cake)
Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.emulations
Subject: GVP series II and BridgeBoard (2088) problem
Message-ID: <2806126e.4eeb@petunia.CalPoly.EDU>
Date: 12 Apr 91 20:02:54 GMT
Reply-To: siannce@polyslo.CalPoly.EDU (Twinkie the Sponge Cake)
Organization: Twinkie The Sponge Cake
Lines: 27



I posted an earlier message about not being able to use these 2 devices 
together and have narrowed it down a little. When both devices are in their
slots (The GVP controller has 2 megabytes on it and is the new one) the 
binddrivers command doesn't work on the bridge-board. I know it isn't working
because when I remove the hardcard and do the binddrivers command the light
on the 5.25" drive will go on for a little bit, and then I can use PCWINDOWs
and everything will work just fine. But when I put the hardcard back in and
issue the binddrivers command I don't get any light on the 5.25" and will
get that "Can't find libraries" requester if I attempt to use PCWINDOWS. I've
even tried doing the binddrivers with the gvp.scsi stuff removed from the
expansion drawer with no luck... Anyone have a similar problem? Or do you have
a GVP II & a A2088 working fine? I'm just wondering if I'm the only one who's
experienced this problem...
	
	Thanks in advance
		-Stephan




-- 
-------------------------------------------------------------------------------
	-Stephan Iannce (siannce@polyslo.CalPoly.EDU)     // YAAJ (Yet Another
          	   On the E^4 Year plan.            	\X/      Amiga Junkie)
-------------------------------------------------------------------------------