Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!wuarchive!swbatl!texbell!swpyr2!ammrk
From: ammrk@swpyr2.sbc.com (Mike R. Kraml)
Newsgroups: comp.sys.amiga.hardware
Subject: Help with Autoconfig on Amigas...
Keywords: Just ain't happening!!!
Message-ID: <67@swpyr2.sbc.com>
Date: 10 Apr 91 03:26:47 GMT
Organization: Southwestern Bell Tele. Co. - Finance Dept. - St. Louis, Missouri
Lines: 29


   Hello, anyone out there worked with expansion boxes for the A500?

   Equipment: A500 with IVS trumpcard 2 slot box, making work with 
			  2090A controller and 2052 Ram card.

   Problem  : Each card will autoconfig by them self, but not together.

   What I have done is tested each slot individually by moving autoconfig
   IN line (pin 12 (active low)), having each card autoconfig in either 
   slot.  When both cards are installed, with the autoconfig OUT line from
   slot 1 going to the autoconfig IN line on slot 2, the system just hangs
   at the light gray screen (before booting (blue screen)).  I have watched
   the autoconfig OUT from slot one, and it does go (active) LOW after a
   second or so from power up, but the second card never passes autoconfig?
   I assume that the second card is hanging for some reason, but I have no
   reason why.  Any ideas?  

                              Thanks in advance, Mike...

		   



-- 
 =============================================================================
  Mike Kraml - Manager-Separations Mechanization - SWBT - Finance Department
  One Bell Center - 30-D-06 - St. Louis, Mo. 63101        PHONE: 314-235-8012
  UUCP: {uunet, bellcore, texbell}...!swpyr2.sbc.com!ammrk