Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!emory!hubcap!ncrcae!opusc!mazurka!kenny From: kenny@mazurka.UUCP (Kenneth Fletcher Yarnall, Ab.D.) Newsgroups: comp.sys.amiga.hardware Subject: Adding 16-bit memory to a 2500 Message-ID: Date: 9 Apr 91 04:19:38 GMT Organization: Math Department, USC Lines: 17 I asked this before, but I have my suspicions as to whether it got out... I am thinking of adding memory to the 2091 in my 2500/30. I recall Dave commenting a long time ago that it was possible to regulate the order in which memory was used by the system, and thus ensure that this 16 bit memory would be used only after all the 32 bit stuff had been soaked up. Unfortunately, I didn't save the article. Could someone (Dave??? :-) re- explain this? I promise to write it down this time... Thanks, (PS. Replying via email probably won't work. Use one of the addresses below) -- Ken Yarnall /// kenny%mazurka@opusc.csd.scarolina.EDU Math Department, USC \\\/// yarnall@usceast.cs.scarolina.EDU Columbia, S.C. 29208 \\\/ (803)777-5218 "I'm not good in groups. It's hard to work in a group when you're omnipotent." - Q