Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: fastmem expasion and janus hd problem.
Keywords: janus bridgeboard a2000 expansion memory
Message-ID: <1100@cbmger.UUCP>
Date: 11 Apr 91 07:52:48 GMT
References: <1991Apr10.081808.22487@rodan.acs.syr.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 22

In article <1991Apr10.081808.22487@rodan.acs.syr.edu> mpalange@rodan.acs.syr.edu (Mark Palange) writes:
>
>1: My set up -> A2000, 2 internal drives, A2088 XT Bridgeboard, ST-125 Seagate
>		IBM (Janus) Harddrive, RC-2000 2meg expasion ra(golden image).
>
>2: My problem -> For a few years I've been using my set up with eveything
>		 but the expansion mem with no problems.  When I add the
>		 memory card, My system will crash on the Binddrivers 
>		 commmand if binddrivers finds the janus software in the
>		 sys:expansion directory.  Without the janus software
>		 the memory seems to work flawlessly.  However, that 
>		 disables my harddrive, which I need.

You see, I have a 2500/20 with an A2286 AT board, a PC-side hardcard,
an A2090A hd controller and an A2052 RAM card, all working nicely
together. So I guess it's not the Janus software in your case, but
perhaps that RAM board you have has difficulties with autoconfig?
(Only speculation)

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk