Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!udel!rochester!kodak!eastman!b56vxg.dnet@kodak.com!harding
From: harding%b56vxg.dnet@kodak.com (JON HARDING)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: AT Bridgeboard to external floppy... help? again?
Message-ID: <1850@eastman.UUCP>
Date: 11 Apr 91 18:47:54 GMT
References: <1841@eastman.UUCP> <1991Apr9.155713.21743@cbnewse.att.com>
Sender: news@eastman.UUCP
Reply-To: harding%b56vxg.dnet@kodak.com
Distribution: usa
Organization: Eastman Kodak Company, Rochester NY, USA
Lines: 17
News-Software: VAX/VMS VNEWS 1.3-4

In article <1991Apr9.155713.21743@cbnewse.att.com>, hjanssen@cbnewse.att.com (hank janssen) writes...
>From article <1841@eastman.UUCP>, by harding%b56vxg.dnet@kodak.com (JON HARDING):
>> In article <1991Apr4.171111.13500@ns.network.com>, guy@ns.network.com (Guy D'Andrea) writes...
>>>How can I rig a cable so I can plug my external Amiga floppy into an AT 
>>>Bridgeboard (Like I could with my XT BB...)?
>>> Guy Dandrea, Network Systems Corp.                       //                 
>> Well, DALCO sells a kit: disk enclosure, cables, bulkhead connectors, etc.
>> for $69 which I used to add a second 1.2Mb drive to my new A2286 board, ($69
FIRST, I don't represent DALCO, either.  That said, their number is 
1-800-445-5342. Mail order to DALCO ELECTRONICS, P.O. Box 494 Franklin, Ohio
zip 45005 (Business address 223 Pioneer Blvd. Springboro, Ohio 45066.)
I don't recall the order numbers but the woman I dealt with was curteous and
knowledgable. Warning: the kit comes without instructions. 
N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J 
|	Jon Harding, N2KZJ	email: harding%b56vxg.dnet@Kodak.COM	      |
|		* I don't represent KODAK by word or deed. *		      |	
N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J N 2 K Z J