Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewse!hjanssen
From: hjanssen@cbnewse.att.com (hank janssen)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: 2286 and accelerators
Message-ID: <1991Apr12.203024.24570@cbnewse.att.com>
Date: 12 Apr 91 20:30:24 GMT
References: <3158@enea.se>
Organization: AT&T Bell Laboratories
Lines: 22

From article <3158@enea.se>, by tope@enea.se (Tommy Petersson):
> In article <69806@eerie.acsu.Buffalo.EDU- v089pfrb@ubvmsd.cc.buffalo.edu writes:
> -
> - Hi. Are there any IBM accelerator  cards that will work with the 
> -a2286 board? I am interested in 386sx accelerators (the 386 needs
> -a 32 bit bus? so it wouldn't work right?). Does  anyone have 
> -or know of an accelerator which works with this card?
> -
> -jm
> -sunyab
> 
> You can have a 386 accelerator, but only a few of them works due to
> signal conflicts so you have to be sure before you buy.
> 
> A 386SX accelerator wouldn't accelerate a 286 BB very much.


If this is the case, which accelerators will owrk with the A2286.
And how much or less is the speed gain from such a board.???

Hank.
att!ihlpb!hjanssen