Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!news.cs.indiana.edu!msi.umn.edu!noc.MR.NET!gacvx2.gac.edu!hhdist
From: TDSTRONG%MTUS5.cts.mtu.edu@VM1.NoDak.EDU (Tim Strong)
Newsgroups: comp.sys.handhelds
Subject: RE: battery test  HELP!!!
Message-ID: <262611C6C0000E54@gacvx2.gac.edu>
Date: 15 Apr 91 03:11:44 GMT
Lines: 27
Return-path: <@VM1.NoDak.EDU:TDSTRONG@MTUS5.cts.mtu.edu>
In-reply-to: Your message of Sun, 14 Apr 1991 17:37 CST
To: handhelds@gac.edu

>
>I replaced my batteries on my 48 yesterday and I did an
>ESD test immediately after replacing them.  I got this
>on my display
>
>ESD  210V  210V
>     |     |
>
>with the vertical lines three pixels away from being flush
>with the 2's.
>
>I have a brand new 128K ram card installed.
>
>What does this display mean?  I have heard tell that the vertical
>bars mean that there is something wrong.
>

No need to panic.  Everything is fine.  The bars mean a low battery
condition exists.  A bar under the 2 means that port 2 has a low battery.
or in your case no battery cause theres no card.  The lack of a bar
under the 1 and 0 means the batteries in these ports are fine.

======================================================================
  ___
  I__)  _   _I  _   _   Tim Strong <TDSTRONG@MTUS5.cts.mtu.edu>
  I  \ (_I (_I (_I I    Michigan Tech.    Houghton, Michigan, U.S.A.

======================================================================