Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!ceres.physics.uiowa.edu!news.iastate.edu!cs352a41 Newsgroups: comp.sys.ibm.pc.misc Subject: Re: help figuring out what's the problem Message-ID: From: cs352a41@cs.iastate.edu (Adam Goldberg) Date: 11 Apr 91 03:36:58 GMT Sender: news@news.iastate.edu (USENET News System) References: <1991Apr11.004927.24680@midway.uchicago.edu> Distribution: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware,comp.unix.misc Organization: Iowa State University, Ames IA Lines: 22 epc1@quads.uchicago.edu (en pum cho) writes: >i'm currently using an IBM PS/2 55SX with a new ZOOM modem with v.42bis >to access a SUN server at school with ProComm 1.1B emulating a VT102 >terminal. however, whenever i use something slightly graphical in nature >iget problems. right now i can't use emacs or the talk daemon in >UNIX 4.3 BSD effectively because when i make changes (or sometimes) >just write, the screen on my IBM doesn't get refreshed properly. >so if this message looks strange, it's because i don't get an accurate >portrayal on my screen of what this actually looks like. I have the same problem: Procomm's VT100 emulation isn't QUITE right. Try another term program--but I haven't found one that works right yet. They all do somethings differently. -- +-----------------------------------------------------------------------------+ ! Adam Goldberg ! "It's simple! Even a PASCAL ! ! cs352a41@cs.iastate.edu <= this one ! programmer could do it!" ! +-----------------------------------------------------------------------------+