Xref: utzoo comp.sys.mac.hardware:10156 sci.electronics:19180
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uunet!mixcom!jjwwjj
From: jjwwjj@mixcom.COM (Robotic Systems)
Newsgroups: comp.sys.mac.hardware,sci.electronics
Subject: CHEAP MAC PARALLEL I/O NEEDED
Keywords: parallel input output serial macintosh
Message-ID: <504@mixcom.COM>
Date: 9 Apr 91 17:58:00 GMT
Followup-To: sci.electronics
Distribution: usa
Organization: Milwaukee Information eXchange (Milwaukee, WI)
Lines: 16

Perhaps this has been discussed before, but here it is again...

I am looking for a cheap, simple way to get parallel I/O from my Macintosh. I
would prefer a method which will allow me dump/read from/to my modem port using
a telecom program (could I simply use a UART -- can they work with RS422?). I
will also consider SCSI, but I only need 5 lines each way at ttl levels.

Any suggestions? Please post or e-mail. If I get enough responses, I'll post a
summary.

Thanks.
-- 
===============================================================================
Clint Laskowski              Post Office Box 552, Cudahy, Wisconsin  53110-0552
ROBOTIC SYSTEMS              INTERNET: robots@mixcom.com  VOICE: (414) 769-9332
===============================================================================