Xref: utzoo comp.unix.aux:4448 comp.sys.mac:56348 comp.sys.mac.system:4336 comp.sys.mac.misc:10898
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!ccncsu!purdue!news.cs.indiana.edu!sdd.hp.com!wuarchive!rex!bourbon!dejesus
From: dejesus@bourbon.ee.tulane.edu (Francisco X DeJesus)
Newsgroups: comp.unix.aux,comp.sys.mac,comp.sys.mac.system,comp.sys.mac.misc
Subject: Re: cloning the A/UX root partition (SUMMARY)
Summary: Thanks!
Keywords: clone A/UX partition SCSI
Message-ID: <7040@rex.cs.tulane.edu>
Date: 14 Apr 91 21:40:21 GMT
References: <6962@rex.cs.tulane.edu>
Sender: news@rex.cs.tulane.edu
Distribution: usa
Organization: E.E. Dept., Tulane University, New Orleans, LA
Lines: 34


    Well, after a ton of email and reply posts, this is what I did: To clone
the A/UX root partition (slice 0) from one SCSI drive to another, I used the
following command typed in from A/UX Startup (sash):

dd if=/dev/dsk/cXd0s0 of=/dev/dsk/cYd0s0

    Where X and Y are the source and destination drive's SCSI ID's,
respectively. Since this was run under A/UX Startup, A/UX itself was not
really running so it was doing this from MacOS. It worked great and took
about an hour each time. If the destination drive did not contain A/UX
before doing this, use some kind of partitioning software to make the
necessary A/UX partitions on it (I was using Silverlining). In addition,
and though I was not sure this was necessary, I booted from the "cloning"
drive and made unix file systems on the destination drive's A/UX partitions.

    Another solution proposed to me was using "find -depth -print" in
combination with "cpio" under A/UX itself. Although I did not try it, it
certainly seems it should work, since it gives cpio the recursive listing
of all the files with the full pathnames.

    I received serveral other interesting approaches, but they all involved
being in A/UX or A/UX Startup. I never heard of any MacOS program that would
clone just a partition. A couple of people suggested using the Apple utility
SCSI Cloner, but that would clone and entire drive, not just a partition,
which I couldn't do because I was using at least four different drive sizes.

    Thanks a lot to everyone who responded... there were too many to thank
individually but you know I appreciate your help.
--
   ___ /      _______________________________      - Francisco X DeJesus
   |- / \/                                  \\
   ' /  /\    dejesus@bourbon.ee.tulane.edu  \\__________________________
    /         ak662@cleveland.freenet.edu    ////////////////////////////