Path: utzoo!utgpu!watserv1!maytag!xenitec!zswamp!root
From: root@zswamp.uucp (Geoffrey Welsh)
Newsgroups: comp.dcom.modems
Subject: Connect an Intel 9600ex modem to an AT&T 3B2/300
Message-ID: <7213.28093482@zswamp.uucp>
Date: Sun, 14 Apr 91 13:13:52 EST
Organization: Izot's Swamp BBS (FidoNet), Kitchener, Ontario

James D. Corder (jdc@alix.UUCP ) wrote:

 >        I just purchased an Intell 9600ex modem for my Net 
 >Feed.  However,
 >I can not get it to work with my AT&T 3B2/300.  Since the 
 >modem will work
 >fine connect to a terminal, I think that it might be 
 >cabeling problem.

 >        I do have it set as a Hayes 9600 type device.

 >        I simply changed the Systems, Devices, and inittab 
 >files.  Then unpluged
 >my 2400 and plugged in my new 9600.  Well:-( I am still 
 >sending at 2400:-(

   I once plugged a Trailbalzer Plus into a 3B2/4000; it was a multiperson 
effort because I could not find any standard AT&T modular to DB-25 adapters 
whose wiring was acceptable to me; I ended up wiring one from scratch while 
the operator tweaked the config to match my specification.

   Unfortunately, I don't remember what he changed in the configurations!

   Still, if the modem works at 9600 talking to a terminal, then it's not 
likely to be a serious cabling problem.
 

--  
UUCP:     watmath!xenitec!zswamp!root | 602-66 Mooregate Crescent
Internet: root@zswamp.fidonet.org     | Kitchener, Ontario
FidoNet:  SYSOP, 1:221/171            | N2M 5E6 CANADA
Data:     (519) 742-8939              | (519) 741-9553
The mile is traversed not by a single leap, but by a procession of coherent 
steps; those who insist on making the trip in a single element will be
failing long after you and I have discovered new worlds. -- me