Newsgroups: comp.periphs Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!m.cs.uiuc.edu!ux1.cso.uiuc.edu!iboga!berger From: berger@iboga (Mike Berger) Subject: Re: Trimm Towers for SMD drives. Message-ID: <1991Apr17.203600.14438@ux1.cso.uiuc.edu> Keywords: Trimm, SMD Sender: usenet@ux1.cso.uiuc.edu (News) Organization: University of Illinois at Urbana References: Date: Wed, 17 Apr 1991 20:36:00 GMT Lines: 18 apeel@mullauna.cs.mu.OZ.AU (Andrew Gregory Peel) writes: >Does anybody know ... >When a Sabre or 8" Fujistu drive is mounted in an 8" Trimm tower, what >is needed? The Trimm catalogue lists a shelf, which I guess must attatch >to the drive. Do the brackets which bolt onto the tower come with this, or >must they be bought separately, and what are they called (part nos.?). *---- The mounting screws that came with our Sabre drives were sufficient to mount them on the sliding shelf in the Trimm enclosure. The hardest part was figuring out how to open up the Trimm cabinet! -- Mike Berger Department of Statistics, University of Illinois AT&TNET 217-244-6067 Internet berger@atropa.stat.uiuc.edu