Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!samsung!uakari.primate.wisc.edu!sdd.hp.com!hplabs!otter.hpl.hp.com!hpltoad!hpopd!hpcpbla!kev From: kev@hpcpbla.HP.COM (Kevin Jones) Newsgroups: comp.periphs.scsi Subject: Re: Multiple Initiators, Single Target Message-ID: <9850020@hpcpbla.HP.COM> Date: 17 Apr 91 06:52:33 GMT References: <25@earth.tsd.arlut.utexas.edu> Organization: HP Computer Peripherals Bristol, UK Lines: 38 1. Single Initiator - Single Target 2. Single Initiator - Multiple Targets 3. Multi Initiator - Single Target 4. Multi Initiator - Multiple Targets Most SCSI implementations have reached "2" of the above. The SCSI spec allows for all of the above. Whether or not you can do "3" or "4" depends on how well "SCSI" has been implemented on the particular hosts and targets you have in mind. A number of SCSI implementations can't handle "more than one thing at once". This is either because their designers didn't design the functionality in, or they couldn't be bothered to test/fix/get-the-thing-working. The answer to your question is therefore: "It Depends.....". My guess is that if the Target is a disk drive then you should be able to get a disk that can work with multiple hosts. If your target is a tape/printer/plotter/scanner then you might have to hunt for one that supports this featurism since multi-host support ain't much of a issue for these types of peripherals. Regards, Kevin Jones. ----------------------------------------------------------------- Kevin Jones. | Hewlett Packard Ltd, | Computer Peripherals Bristol, kev%hpcpbla@hplb.hpl.hp.com | Filton Road, | Stoke Gifford, Tel: 011 44 272 799910 (ext 22351) | Bristol. BS12 6QZ. | ENGLAND. ----------------------------------------------------------------- This response does not represent the official position of, or statement by, the Hewlett-Packard Company. The above data is provided for informational purposes only. It is supplied without warranty of any kind.