Xref: utzoo comp.periphs.scsi:2406 comp.unix.sysv386:7096 comp.sys.ibm.pc.hardware:7820
Newsgroups: comp.periphs.scsi,comp.unix.sysv386,comp.sys.ibm.pc.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!think.com!unixland!bill
From: bill@unixland.uucp (Bill Heiser)
Subject: Re: (LONG) problem with multiple scsi devices on ESIX machine
Message-ID: <1991Apr19.034406.16357@unixland.uucp>
Organization: Think_Tank BBS & Public Access Unix
References: <1991Apr13.211855.4730@unixland.uucp> <9104152228.41@rmkhome.UUCP>
Date: Fri, 19 Apr 91 03:44:06 GMT

In article <9104152228.41@rmkhome.UUCP> rmk@rmkhome.UUCP (Rick Kelly) writes:
>
>Have you removed the SCSI terminators from your 1542b?  Ideally, your SCSI
>bus should only be terminated at the ends.  The external connector and the
>internal connector are the same bus.  I have seen problems like this before.
>I am using an ADAPTEC 1540A, however, I have nothing on the external connector
>right now.
>

Yup, the terminators are only on each end of the chain.\

I think what I'm seeing is an incompatibiltiy between the Maxtor and 
the Toshiba.  


-- 
bill@unixland.uucp                 The Think_Tank BBS & Public Access Unix
...!uunet!think!unixland!bill
...!{uunet,bloom-beacon,esegue}!world!unixland!bill
508-655-3848 (2400)   508-651-8723 (9600-HST)   508-651-8733 (9600-PEP-V32)