Xref: utzoo comp.windows.ms:11529 comp.protocols.tcp-ip.ibmpc:5542
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!stanford.edu!leland.Stanford.EDU!jcyu
From: jcyu@leland.Stanford.EDU (Jeff Yu)
Newsgroups: comp.windows.ms,comp.protocols.tcp-ip.ibmpc
Subject: Re: Installing New Printer Driver
Message-ID: <1991Apr15.212544.29754@leland.Stanford.EDU>
Date: 15 Apr 91 21:25:44 GMT
References: <1991Apr14.042724.15098@leland.Stanford.EDU>
Organization: AIR, Stanford University
Lines: 19

Thanks to all who replied to my initial inquiry. 

As a warning to others, I will briefly point out my problems.
I initially tried to copy the new PSCRIPT.DRV file and the
appropriate .WPD file (in my case, IBM39521.WPD) to the 
WINDOWS\SYSTEM directory.  I (incorrectly) assumed that this
would make the WPD file visible to Windows after installing the
new driver (selecting Unlisted printer, etc.) as detailed in the
README.TXT file on SDLDISK6.  The README.TXT file, however, states
that one should place disk 6 into the diskette drive at the
Add Printer Dialog box.  One actually needs the disk containing
the WPD file (SDLDISK7, in my case).  Interesting, I could not get
Windows to read the WPD file I had placed in the SYSTEM subdirectory
on my hard disk.  It appears that some additional files on disk 7 are
needed.

Thanks again,

Jeff Yu