Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!munnari.oz.au!bruce!trlluna!rhea!aduncan
From: aduncan@rhea.trl.oz (Allan Duncan)
Newsgroups: comp.sys.amiga.applications
Subject: Re: WorkBench 2.0
Message-ID: <3375@trlluna.trl.oz>
Date: 15 Apr 91 22:49:52 GMT
References: <1991Apr15.165156.19988@sbcs.sunysb.edu>
Sender: news@trlluna.trl.oz
Lines: 18

From article <1991Apr15.165156.19988@sbcs.sunysb.edu>, by dtiberio@libserv1.ic.sunysb.edu (David Tiberio):
...
>   I have a 2.5 meg a500, but could never get the 2.0 to work on my
> machine. I heard that it may not work if you have the ram expansion
> on an inbternal expansion slot (which I do). However, I have used
> ZKick on another Amiga where KickIt wouldn't do it. Even though I can
> get 1.8 megs FAST to autoconfigure on bootup, it refuses to acknowledge
> that I have any fast ram.
Zkick requires that you have RAM that autoconfigures at 100000h, so it
must get first bite at the cherry.  This means that it must be the first
autoconfigure device along from the coprocessor slot, so if you had your
Hdisk there, swap them.  There is some problem with the GVP drives in
this regard, as is explained in the docos.
 
Allan Duncan	ACSnet	a.duncan@trl.oz
(+613) 541 6708	ARPA	a.duncan%trl.oz.au@uunet.uu.net
		UUCP	{uunet,hplabs,ukc}!munnari!trl.oz.au!a.duncan
Telecom Research Labs, PO Box 249, Clayton, Victoria, 3168, Australia.