Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!hsdndev!rice!uupsi!sunic!lth.se!newsuser
From: e89fn@efd.lth.se (Fredrik Norrman)
Newsgroups: comp.sys.amiga.applications
Subject: Re: WorkBench 2.0
Message-ID: <1991Apr17.095042.10823@lth.se>
Date: 17 Apr 91 09:50:42 GMT
References: <1991Apr15.165156.19988@sbcs.sunysb.edu> <3375@trlluna.trl.oz>
Sender: newsuser@lth.se (LTH network news server)
Reply-To: e89fn@efd.lth.se (Fredrik Norrman)
Organization: Lund Institute of Technology, Sweden
Lines: 23

In article <3375@trlluna.trl.oz> aduncan@rhea.trl.oz (Allan Duncan) writes:
>From article <1991Apr15.165156.19988@sbcs.sunysb.edu>, by dtiberio@libserv1.ic.sunysb.edu (David Tiberio):
>...
>>   I have a 2.5 meg a500, but could never get the 2.0 to work on my
>> machine. I heard that it may not work if you have the ram expansion
>> on an inbternal expansion slot (which I do). However, I have used
>> ZKick on another Amiga where KickIt wouldn't do it. Even though I can
>> get 1.8 megs FAST to autoconfigure on bootup, it refuses to acknowledge
>> that I have any fast ram.
>Zkick requires that you have RAM that autoconfigures at 100000h, so it
>must get first bite at the cherry.  This means that it must be the first
>autoconfigure device along from the coprocessor slot, so if you had your
>Hdisk there, swap them.  There is some problem with the GVP drives in
>this regard, as is explained in the docos.

I'm buying the GVP Series II harddrive with 2MB memory for A500.
Will it work with Z-kick?
Maybe I buy something else?

Thanks in advance!

Fredrik Norrman
e89fn@efd.lth.se