Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!udel!sbcs!libserv1.ic.sunysb.edu!dtiberio
From: dtiberio@libserv1.ic.sunysb.edu (David Tiberio)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Amiga 500 memory question.
Message-ID: <1991Apr15.170559.21156@sbcs.sunysb.edu>
Date: 15 Apr 91 17:05:59 GMT
References: <1991Apr12.210127.11786@gpu.utcs.utoronto.ca>
Sender: usenet@sbcs.sunysb.edu (Usenet poster)
Organization: State University of New York at Stony Brook
Lines: 32

In article <1991Apr12.210127.11786@gpu.utcs.utoronto.ca> bhgs@gpu.utcs.utoronto.ca (R. Holdom) writes:
>Dear network;
>    I want to add more memory to my 500.  What I have right now is
>a 500 with a 501 pack and the 1meg chip memory hack up and running.
>I also already have C Ltd/Kronos SCSI controller, so buying a hard
>disk controller that takes RAM is kind of wastefull.  What I was
>thinking was buying an adRAM 540 board, and getting rid of the
>501 pack.  Here comes the questions.  If I do add the adRAM 540,
>will I still be able to have 1meg chip ram?  I realise there

  Call ICD at 1800-373-7700

  The baseboard, another 4+2 meg board, does allow the 1 meg chip
ram option. All you have to do is move a jumper or two, and place
the chips in a particular bank on the baseboard (0 - closest to the
front of the Amiga).

>may be some jumpers to jump and whatnot but will the adRAM
>support that.
>    Any other suggestions on how to do it are welcome.
>
>
>::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
>: Jon Spencer.                bhgs@gpu.utcs.utoronto.ca          :
>::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::


-- 
    David Tiberio  SUNY Stony Brook 2-3481  AMIGA  DDD-MEN  Tomas Arce 
           Any students from SUNY Oswego? Please let me know! :)

                   Un ragazzo di Casalbordino, Italia.