Path: utzoo!attcan!uunet!ukma!usenet.ins.cwru.edu!agate!bionet!uwm.edu!cs.utexas.edu!sdd.hp.com!decwrl!pa.dec.com!rust.zso.dec.com!shlump.nac.dec.com!decuk.uvo.dec.com!arrods.enet.dec.com!goldstein
From: goldstein@arrods.enet.dec.com (Steve Goldstein)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: HELP! Bill's Boards
Message-ID: <1991Apr6.180351.17410@decuk.uvo.dec.com>
Date: 6 Apr 91 22:59:38 GMT
Sender: usenet@decuk.uvo.dec.com (News Account)
Organization: Digital Equipment Company ( Uk )
Lines: 29
Nntp-Posting-Host: arrods

In article <8406@crash.cts.com>, jackf@pnet01.cts.com (Jack Fitchett) writes...
> 
>    Just got a great deal on a bills boards exspansion chassis but I'm
>having trouble getting it to work with An ICD SCSI + 2meg in it.  If
>I let it autoconfig **GURU**.  If I inhibit it and try and access the 
>SCSI afterboot **GURU**.  Seems to be at randon times and random GURU 
>nubers but always on first attemtp to talk to the card.  Could be the Bill's
>Boards as I have no other A2000 cards to try out on it.  Any one been 
>there before???
>   
>                                                jack
> 
> 
>UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!jackf
>ARPA: crash!pnet01!jackf@nosc.mil
>INET: jackf@pnet01.cts.com

The Problem is probley timming...One of the biggest faults with the BILL
Board was the fact that they had a pass-through system and this screwed the 
timming ..  I have a MonAMI Jr. a three slot terminated adaptor on my A500
and in it I have a HardFrame and an 8-UP with 2-megs... I have NO problems
withn this combination...



      ///  Steve Goldstein
     ///   Digital Equipment Co
 \\\///    England.
  \XX/     goldstein%arrods.dec@decwrl.dec.com