Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!batcomputer!cornell!uw-beaver!zephyr.ens.tek.com!tektronix!reed!glacier!busker!p0.f601.n105.z1.FIDONET.ORG!Michael.Reeves
From: Michael.Reeves@p0.f601.n105.z1.FIDONET.ORG (Michael Reeves)
Newsgroups: comp.sys.amiga.hardware
Subject: 86-pin A500 Bus Edge Card Connector
Message-ID: <402.280B9154@busker.fidonet.org>
Date: 17 Apr 91 04:39:12 GMT
Sender: ufgate@busker.fidonet.org (newsout1.26)
Organization: FidoNet node 1:105/601.0 - Gamorian Vortex Pro, Salem OR
Lines: 19

Could someone (perferable from Commodore) tell me the spacing for the
86-pin edge card connector necessary to connect to the Amiga 500
Expansion Bus?
 
I have a project which needs a small extender board and I need to know
exactly the proper edge card connector to obtain for this project.
 
Also how far can the bus be extended with a printed circuit board
before experiencing problems.  I need to extend the bus at a right
angle upward toward the keyboard.
 
Thanks in Advance for your Reply.



--  
Michael Reeves - via FidoNet node 1:105/14
    UUCP: ...!{uunet, reed}!glacier!busker!601.0!Michael.Reeves
INTERNET: Michael.Reeves@p0.f601.n105.z1.FIDONET.ORG