Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!bionet!agate!usenet.ins.cwru.edu!ysub!psuvm!jkt100
From: JKT100@psuvm.psu.edu (JKT)
Newsgroups: comp.sys.amiga.hardware
Subject: Hard Disk Light
Message-ID: <91108.205523JKT100@psuvm.psu.edu>
Date: 19 Apr 91 00:55:23 GMT
Organization: Penn State University
Lines: 24

I recently pulled out my 2091 to put terminating resistors on its
Quantum 40 that I should have had there in the first place, but
only just got hold of.  Upon reinserting my 2091 and powering up
I have found that my Hard Disk light is now always lit--not as
brightly as when disk access is occurring, but with a dull glow.
The machine works perfectly; the hard drive light just glows.
I am SURE I put the LED connector back the way it was before,
but just to be sure, I pulled it off and put it back (to see if
it was a bad connection or something.)  No dice; the glow persists.

So, does anyone know what the problem might be?  It is not
critical (I hope), but it's rather disconcerting to have that LED
glowing there and not know why...
                                     Thanks for any info,

                                                            Kurt
--
 -----------------------------------------------------------------------
:: Kurt Tappe          (215) 363-9485 :: With.   Without.   And who'll ::
:: 184 W. Valley Hill Rd.    458-5000 :: deny it's what the fighting's ||
:: Malvern, PA 19355-2214       (work)|| all about?    -  Pink Floyd   ::
::  jkt100@psuvm.psu.edu               --------------------------------||
::  jkt100@psuvm.bitnet  jkt100%psuvm.bitnet@psuvax1  QLink: KurtTappe ||
 -----------------------------------------------------------------------