Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!munnari.oz.au!uhccux!uhccux.uhcc.Hawaii.Edu
From: amiga@uhccux.uhcc.Hawaii.Edu (Boing)
Newsgroups: comp.sys.amiga.hardware
Subject: A1000 hardware compatibility?
Message-ID: <12552@uhccux.uhcc.Hawaii.Edu>
Date: 19 Apr 91 02:18:41 GMT
Sender: amiga@uhccux.uhcc.Hawaii.Edu
Organization: University of Hawaii
Lines: 19

Hi all, was wondering if any of you eminently knowledgeable folks could
let me know if you see any forseeable problems with this set up I am
considering:

I currently own a venerable A1000 with the 256K mem expansion in the
front panel and a 2 meg allegra ram ram board on the expansion slot.
(also A1010 external floppy, printer, and modem, but these seem
irrelevant).  I was sort of planning to upgrade sometime to one of the
3000 series machines, but I am also toying with the idea of saving some
$$$ and revitalizing my 1000.  Basically, I am considering a rejuvenator
(which should provide 1 meg of chip mem, ECS, a video slot, and a ROM 
socket--would this allow me to use 2.0, given zkick?) and possibly a Lucas/
Frances combination.  Will these devices cooperate nicely with my existing 
hardware and each other?  Some sort of large storage device like a Syquest 
or Ricoh removable cartridge type hard drive system I could move over to a 
new machine sometime in the unknown future is also a possibility.  Any 
and all suggestions and advice are welcomed.

-baron