Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!spool.mu.edu!cs.umn.edu!kksys!orbit!pnet51!koleman
From: koleman@pnet51.orb.mn.org (Kurt "Koleman" Koller)
Newsgroups: comp.sys.amiga.programmer
Subject: Re: Instructions on 68000
Message-ID: <4630@orbit.cts.com>
Date: 17 Apr 91 00:05:02 GMT
Sender: news@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 28


sschaem@starnet.uucp (Stephan Schaem) writes:
>Speaking of Scc, a good way to use it is to set the bliter minterm with
>it... For plane Set/Clear.
>If you have a color value (x fliped:-) just do an add.b dx,dx and SCC
>dy.
>Could be use for seting byte flag (using Scc and Tst).
>SF can be used instead of clr.b ...
>(but same timing, but slower on a 68020)
>Anyway, you sould get the Programer's Reference Manual.
>
>							Stephan.

Just to save face here...
 
The reason that I posted this inquiry is because I have 3 books here, one of
which is a Motorola reference on the 68000, none of which have any set
instructions under the heading Scc or any other similar heading.
 
That is why I asked here.  I AM literate.

---------------------------  _  _   _   _     ___  __  __    _    __   _
| Kurt "Koleman" Koller   | ( )/ ) /,\ ( )   ( __)(  \/  )  ( )  (  \ ( )
| P.O. Box 50656          | (   \ (   )( )__ ( __)( )\/( ) (_|_) ( )\\( )
| Mendota, MN  55150-0656 | (_)\_) \_/ (____)(___)(_)  (_)(_) ( )(_) \__)
---------------------------
UUCP: {crash tcnet}!orbit!pnet51!koleman
INET: koleman@pnet51.orb.mn.org