Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!dimacs.rutgers.edu!seismo!ukma!beech
From: beech@ms.uky.edu (Wayne Beech)
Newsgroups: comp.sys.hp
Subject: connecting a hp2631a printer to a 25 pin rs232 port help?
Message-ID: <1991Apr18.011653.29945@ms.uky.edu>
Date: 18 Apr 91 01:16:53 GMT
Sender: beech@ms.uky.edu (Wayne Beech)
Organization: University Of Kentucky, Dept. of Math Sciences
Lines: 17

I have a hp2631a printer that i would like to connect to a standard rs232
port but unforunately do not have the information needed to make the cable.
Currently the printer has a 12485-60006 edge type connector on it.  Another
problem is that this printer does not have a baud/parity option installed
so i need to know what baud rate the printer runs at or if it uses some
type of clock from the printer card in the cpu.  If any one could send me
information that will help me get the printer up or a diagram/chart that
shows what the pins coming out the back of the printer are I would greatly
appreciate it.

Wayne Beech
UK Computing Center
-- 
=============================================================================
UUCP  : ukma!beech
BITNET: beech@ukma
DOMAIN: beech@ms.uky.edu